Vent venligst...
Varen er tilføjet indkøbskurven. Se indkøbskurv her
Tom Indkøbskurv

TRANSITION NETWORKS Transceiver/FENet TX>FENet FX ST MM 2km

Forsiden Netværk Netværkstilbehør TRANSITION NETWORKS Transceiver/FENet TX>FENet FX ST MM 2km
For at se vore priser skal du være oprettet som kunde: Er du allerede oprettet som kunde skal du logge ind.
TRANSITION NETWORKS Transceiver/ FENet TX>FENet FX ST MM 2km (E-100BTX-FX-05)

TRANSITION NETWORKS Transceiver/FENet TX>FENet FX ST MM 2km

Varenr.:
E-100BTX-FX-05

Transition Ethernet Media Converter - Transceiver - 100Base-FX, 100Base-TX - RJ-45 - ST multi-mode - external
  • Produkt Mediekonvertere
På lager
Beskrivelse

E-FRL-MC05(L)

The Full/Half-Duplex 10BASE-FL Transceiver provides low cost network migration options.

Features:

  • Available in both multimode and single mode fiber optic versions.
  • Link Pass Through
    Link Pass Through is a troubleshooting feature that allows the transceiver to monitor both the fiber and copper RX ports for loss of signal.
  • Single mode version supports segments up to 15,000 meters in length.
  • Both multimode and single mode transceivers connect AUI male (DB-15) nodes to a fiber optic medium via a standard ST type connector in both full and half-duplex modes. The ability to operate in full-duplex mode allows for operation between switches, routers and servers using full-duplex Ethernet.
  • Multimode version takes advantage of full duplex transmission to increase data rates between devices up to 20 Mbps.
  • Long-Haul version, E-FRL-MC05(L), uses a 1300nm LED rather than the standard 850nm LED, so it can transmit and receive data over distances up to 5,000 meters. That's almost a 3,000-meter advantage over the standard 10BASE-FL distance of 2,000 meters.

Specifications:

Standards IEEE Std. 802.3™
Connectors 1 AUI male (DB-15); 1 duplex fiber optic
Fiber Optic Connector Specs
Switches Position 1: On/Off selectable SQE testing for NICs and hubs that support SQE

Position 2: LinkAlert On/Off control

Position 3: Half/Full-Duplex mode control
Status LEDs Status: Steady on indicates normal operation; Blinking once indicates link down; Blinking twice indicates AUI packets are too long (local jabber); Not lit indicates no connection to external power.

Collision: Flashing or lit LED indicates collisions are occurring.

Receive: Flashing or lit LED indicates packets are being received.

Transmit: Flashing or lit LED indicates a packet has been transmitted.
Dimensions Width: 1.65" [42 mm]
Depth: 3.8" [95 mm]
Height: 0.94" [24 mm]
Environment 0 – 40°C; 10% – 90% humidity non-condensing; 0 – 10,000 feet altitude
Shipping Weight 1 lb. [0.45 kg]
Compliance UL Listed; FCC & CISPR Class A; CE Mark
Warranty Lifetime

Selvom vi gør vort bedste for at give fyldestgørende information, så er billederne kun vejledende, og selve varen er ikke nødvendigvis 100% identisk med det viste billede. Produkter kan være vist med ekstraudstyr der ikke er inkluderet eller i andre form- og farvevarianter. Hvis der er forskel mellem produktoverskrift, beskrivelse og billede, så er det produktoverskriften som gælder. Hvis du er i tvivl, så kontakt os gerne. Vi tager forbehold for trykfejl, ændring af priser og specifikationer uden varsel.

© 2022 JDM A/S, CVR. 28901194